一、在進行包裝時，我們通常會選用井字架包裝，包裝要符合貯運的需求；井字架是由木材制做而成，上下都是用兩根木方構成，關于下木方的高度，要滿意叉車的作業需求，上木方要上面制做成與卷徑相對應的圓弧形狀，上下木方分別用螺桿進行固定，螺桿的長度要低于上木方的圓弧面避免扎傷鋁圓片。
1、 When packaging, we usually choose well shaped racks for packaging, which should meet the storage and transportation needs; The well shaped frame is made of wood, and both the top and bottom are made of two wooden blocks. Regarding the height of the lower wooden block, it should meet the operational requirements of the forklift. The upper wooden block should be made into an arc shape corresponding to the roll diameter, and the upper and lower wooden blocks should be fixed with screws. The length of the screw should be lower than the arc surface of the upper wooden block to avoid damaging the aluminum circular plate.
二、鋁箔卷外面需要纏上一層健壯的中性或弱酸性的資料（一般選用高發布），然后放人裝箱單，搭接處運用膠帶粘牢。在端面上墊上軟襯墊.以保護鋁箱卷的端面避免劃傷。
2、 The outer surface of the aluminum foil roll needs to be wrapped with a layer of robust neutral or weakly acidic materials (usually selected as high release materials), and then placed on the packing list. The overlap should be firmly adhered with tape. Place a soft pad on the end face to protect the end face of the aluminum box coil from scratches.
三、加入干燥劑。運用整張塑料布包裹住全部的料卷，搭接處外層的塑料布口向下要用膠帶粘牢，將塑料布兩頭剩余塞入管芯。用尺度合適的防雨硬紙板分別沿圓周方向包裹全部鋁圓片和關閉兩頭面，端面和圓周相接處以及全部的縫隙都要用膠帶粘牢
3、 Add desiccant. Wrap all the material rolls with a whole plastic cloth, and use adhesive tape to stick the outer plastic cloth mouth downwards at the overlap. Insert the remaining two ends of the plastic cloth into the pipe core. Wrap all aluminum discs and close both ends along the circumferential direction with waterproof cardboard of appropriate scale. The joints between the end face and the circumference, as well as all gaps, should be firmly adhered with tape.
四、將包好的鋁箔卷放到井字架上而且沿著圓周方向再運用鋼帶固定，鋼帶要捆綁扎結實。在包裝好的鋁箔卷端面上分別貼上一張箱牌。除箱子和井字架的承重、包裝本錢外，還應寫上運送辦法及用戶的運送裝卸方法及注意事項。到井字架上并且沿著圓周方向再使用鋼帶固定，鋼帶要捆綁扎結實。在包裝好的鋁箔卷端面上分別貼上一張箱牌。除箱子和井字架的承重、包裝本錢外，還應寫上運送方法及用戶的運送裝卸方式及注意事項。
4、 Place the wrapped aluminum foil onto the well frame and secure it with steel straps along the circumference. The steel straps should be tightly tied. Attach a box label to each end of the packaged aluminum foil roll. In addition to the weight bearing and packaging cost of the boxes and well racks, the transportation method and user's transportation and loading and unloading methods and precautions should also be written. Mount it on the well frame and secure it with steel straps along the circumferential direction. The steel straps should be tightly tied. Attach a box label to each end of the packaged aluminum foil roll. In addition to the weight bearing and packaging cost of the boxes and well racks, the transportation method, user's transportation loading and unloading methods, and precautions should also be written.
圓片在我們的生活中也是無處不在，比如我們生活中的各種家電外殼，還有圓片在我們的日子中也是無處不在，比方我們?nèi)兆又械母鞣N家電外殼，還有各種各樣的電子產品以及汽車產品等。鋁帶重量和強度不高，純鋁的強度雖不高，但經過冷加工可使其進步一倍，而且經過增加合金元素再經過熱處理進一步強化，其強度可與合金鋼媲美。鋁易加工，鋁可以用任何一種鑄造辦法鑄造。鋁塑性好，可以軋成薄板和箔，拉成管材和細絲，可以用各種機床進行加工。鋁圓片通常選用井字架的方法包裝，井字架大多數選用的是木材，上下都是用兩根木方構成，關于下木方的高度，可以滿意叉車的作業需求。
Circles are also ubiquitous in our daily lives, such as various home appliance shells, and circles are also ubiquitous in our daily lives, such as various home appliance shells, as well as various electronic and automotive products. The weight and strength of aluminum strip are not high. Although the strength of pure aluminum is not high, it can be doubled by cold processing. Moreover, by adding alloy elements and further strengthening through heat treatment, its strength can be comparable to that of alloy steel. Aluminum is easy to process and can be cast using any casting method. Aluminum has good plasticity and can be rolled into thin sheets and foils, drawn into pipes and fine wires, and processed using various machine tools. Aluminum wafers are usually packaged using the method of a well shaped frame. Most of the well shaped frames are made of wood, and the upper and lower parts are composed of two wooden blocks. The height of the lower wooden block can meet the operational requirements of forklifts.
With the summary from the aluminum coil manufacturer, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.gbpeixun.com Or call for consultation, and we will do our best to solve it for you
